Cable driven rake

The cable driven rake is a mechanical fully automatic screen used for liquid/solid separation in the pre-treatment stage of wastewater treatment plants, pumping station …

 

Alternative screening
Fineness of screening : 10 to 80 mm
Discharge height : up to 11 000 mm
Canal height: 500 to 3 000 mm
Canal width : 520 to 1 520 mm (or several attached devices)
Outlet : up to 8 000 m3/h according to the air gap
Compact
Reduced maintenance
Automatic working
Material : 304L or 316L stainless steel

Cable driven rake DCV

 

degrilleur_1cable

BAR SCREEN DCV-S (single cable)

Maximum width of channel = 1 400 mm
Maximum depth of channel = 17 500 mm
Single central cable to drive the rake up and down
Mechanical waste ejector
No possibility to stop on the way down or up (full cycle required)

 

 

degrilleur_2cables

BAR SCREEN DCV-D (double cable)

Maximum width of channel = 2 200 mm
Maximum depth of channel = 17 500 mm
Two lateral cables to drive the rake up and down
Possibility to add a third drum for central cable
Mechanical waste ejector
No possibility to stop on the way down or up (full cycle required)

Bar screen DCV-D (double cable)

 

 

 

degrilleur_3cables

BAR SCREEN DCV-R (triple cable)

Maximum width of channel = 2 200 mm
Maximum depth of channel = 17 500 mm
Two materal cables to drive the rake up and down
One central cable to open/close the rake in the bar
One mechanical ejector to discharge the waste from the rake
possibility to stop on the way down or up

Bar screen DCV-R (triple cable)

 

 

degrilleur_3cables_v2

BAR SCREEN DCV-T (3 cable « heavy duty »)

Maximum width of channel = 3 100 m
Maximum depth of channel = 30 000 mm
Two lateral cables to drive the rake up and down
One central cable to open/close the rake in the bar
One hydraulic rake opening / closing (no other option)
One hydraulic ejector to discharge the waste from the rake
Heavy duty – stronger design

Bar screen DCV-T (3 cable “heavy duty”)