Plate filter press
The filter press is designed for the thickening of industrial or urban sludge. The principle consists in injecting sludge with 15 bars between filtering cloth to evacuate water of it. Sludge can be “conditioned” in several ways in particular by polymer addition (on the level of the pump with sludge), by ferric chloride/and lime addition or (by mixture in a reactor). Three families are available:
- plate filter press with manual plate shifting system : FPM,
- plate filter press with semi-automatic plate shifting system : FPAC and FPAV,
- plate filter press fully automatic without operator assistance type CRS.
plate filter press with manual plate shifting system : FPM
The plate filter press with manual plate shifting system is suitable for small volume of sludge to treat …
– manual shifting of the plates by the operator,
– capacity from 35 to 1300 liters,
– with 30 to 90 plates installed,
– plate thickness from 20 to 35 mm.
plate filter press with semi-automatic plate shifting system : FPAC and FPAV
A semi-automatic or automatic plate shifting, requires a human presence to check the good takeoff of the cakes. Model FPAV is equipped with a jack which comes to draw the first plate, thus allowing the shaking of all the others which are connected between each other.
– mechanized moving of the plates by two lateral trolleys,
– plates are connected to each other,
– capacity from 190 to 7890 liters,
– with 70 to 150 plates installéd,
– plate thickness from 20 to 35 mm.
plate filter press fully automatic without operator assistance type CRS
The filter press is equipped with a fully automatic plate shaking system “CRS” which does not require any human presence
– installation of the plates and filling by hydraulic jack,
– plate shifting by pneumatic jack,
– piloting through one control panel with touch screen,
– capacity from 190 to 7890 liters,
– with 70 to 150 plates installed,
– plate thickness from 20 to 35 mm.